Dry run is a serious and fatal failure for any pump, in the installation of pump and routine maintenance, Y series intelligent pump controller can protect the pump again dry running without any liquid sensor or floats switch, so it can save the pump user cost and decrease the installation and maintenance work.
Typical application scenarios:
-Agricultural irrigation/ pumping
-Pressure Booster Systems
-Waste water treatment
-Water Tanks/Wells
-Drainage System
-Cooling Towers
-Flood Control
-Fishing Boat
Specifications of water pump controller
| Type | Y2 | |||
| Model | Y2-4KW | Y2-7.5KW | Y2-11KW | Y2-15KW |
| Rated Power | 0.75-4KW | 1.1-7.5KW | 1.1-11KW | 2.2-15KW |
| Rated Input Voltage | 380+10%/50Hz or 60Hz | |||
| Qty.of Controlled Pumps | Dual pumps | |||
| Display | LCD display | |||
| Signal Transmission Mode | Level float switch Level probe Pressure switch Electric contact pressure gauge | |||
| Water Level Indication | High/Middle/Low | |||
| Max.Control Distance | ≤2000m without strong electric and electromagnetic fields | |||
| Over/under-voltage Range | 304V-456V(adjustable) | |||
| Protections | Pump stalled protection Dry run protection Over-load protection Under-voltage protection Over-voltage protection Open phase protection Short circuit protection | |||
| Main Functions | Time setting Fault detection Anti-rust inspection Dual pump rotation Automatic restart after power recovery | |||
| Working temperature Working humidity Degree of protection Install position | -25ºC-- +55ºC 20%--90%RH, no drips concreted IP22 Wall mounting | |||
| Product Size | 400x300x190mm | |||
| Package | Box size:26.2*17.2*38cm Carton size:54*39.5*55.5cm PCS/CTN:6 | |||
1)How to choose the power of your pump controller?
Normally we need choose bigger power to run the water pump or motors,.If the pump rated power is 4KW,Pump controller should choose 7.5KW.For Submersible pumps which used in the deep well,please check with us first .
2)Can you provide OEM or ODM ?
Yes,we can make the orders according to your detailed request.
3)How does your factory do the quality control?
Our production process follow up the ISO standard and we control the product quality from the raw materials to the finished product,each of our control panel will be fully assembled and strictly tested before packing and shipping.
4),What is your after sales service policy?
According to the ordering quantity ,we will give some free spare parts or controller for maintenance or replacement and we will give technical training.takes 3-5 days for sample orders,and 15-20 days for orders.
5),What's your main market?
Asia/Europe/Middle East/North and south America/Africa etc.
Dry run is a serious and fatal failure for any pump, in the installation of pump and routine maintenance, Y series intelligent pump controller can protect the pump again dry running without any liquid sensor or floats switch, so it can save the pump user cost and decrease the installation and maintenance work.
Typical application scenarios:
-Agricultural irrigation/ pumping
-Pressure Booster Systems
-Waste water treatment
-Water Tanks/Wells
-Drainage System
-Cooling Towers
-Flood Control
-Fishing Boat
Specifications of water pump controller
| Type | Y2 | |||
| Model | Y2-4KW | Y2-7.5KW | Y2-11KW | Y2-15KW |
| Rated Power | 0.75-4KW | 1.1-7.5KW | 1.1-11KW | 2.2-15KW |
| Rated Input Voltage | 380+10%/50Hz or 60Hz | |||
| Qty.of Controlled Pumps | Dual pumps | |||
| Display | LCD display | |||
| Signal Transmission Mode | Level float switch Level probe Pressure switch Electric contact pressure gauge | |||
| Water Level Indication | High/Middle/Low | |||
| Max.Control Distance | ≤2000m without strong electric and electromagnetic fields | |||
| Over/under-voltage Range | 304V-456V(adjustable) | |||
| Protections | Pump stalled protection Dry run protection Over-load protection Under-voltage protection Over-voltage protection Open phase protection Short circuit protection | |||
| Main Functions | Time setting Fault detection Anti-rust inspection Dual pump rotation Automatic restart after power recovery | |||
| Working temperature Working humidity Degree of protection Install position | -25ºC-- +55ºC 20%--90%RH, no drips concreted IP22 Wall mounting | |||
| Product Size | 400x300x190mm | |||
| Package | Box size:26.2*17.2*38cm Carton size:54*39.5*55.5cm PCS/CTN:6 | |||
1)How to choose the power of your pump controller?
Normally we need choose bigger power to run the water pump or motors,.If the pump rated power is 4KW,Pump controller should choose 7.5KW.For Submersible pumps which used in the deep well,please check with us first .
2)Can you provide OEM or ODM ?
Yes,we can make the orders according to your detailed request.
3)How does your factory do the quality control?
Our production process follow up the ISO standard and we control the product quality from the raw materials to the finished product,each of our control panel will be fully assembled and strictly tested before packing and shipping.
4),What is your after sales service policy?
According to the ordering quantity ,we will give some free spare parts or controller for maintenance or replacement and we will give technical training.takes 3-5 days for sample orders,and 15-20 days for orders.
5),What's your main market?
Asia/Europe/Middle East/North and south America/Africa etc.
