Pump controllers commissioned by our team work for both water supply and drainage under water level and pressure control.For water supply,the pump starts at low water level and stops at high water level.For drainage,the pump starts at high water level and stops at low high water level.
Typical application scenarios:
-Agricultural irrigation/ pumping
-Pressure Booster Systems
-Waste water treatment
-Water Tanks/Wells
-Drainage System
-Cooling Towers
-Flood Control
-Fishing Boat
Specifications of water pump controller
| Type | 20Y | |
| Model | 20Y-2.2KW | 20Y-3KW |
| Rated Power | 0.37-2.2KW | 0.37-3KW |
| Rated Input Voltage | 220V or 110V, 50Hz or 60Hz | |
| Qty.of Controlled Pump | Single pump | |
| Display | LCD display | |
| Signal Transmission Mode | Float switch Level Probe Pressureswitch Electric contact pressure gauge | |
| Water Level Indication | High/Middle/Low | |
| Max.Control Distance | ≤2000m without strong electric and electromagnetic fields | |
| Over/under-voltage Range | 176V-264V(adjustable) | |
| Protections | Pump stalled protection Dry run protection Over-load protection Under-voltage protection Over-voltage protection Open phase protection Short circuit protection | |
| Main Functions | Time setting Fault detection Anti-rust inspection Automatic restart after power recovery | |
| Working temperature Working humidity Degree of protection Install position | -25ºC-- +55ºC 20%--90%RH, no drips concreted IP22 Wall mounting | |
| Product Size | 210*139*65mm | |
| Package | Box size:21.9*7.4*14.7cm Carton size:45.5*31.5*32cm PCS/CTN:16 | |
1)How to choose the power of your pump controller?
Normally we need choose bigger power to run the water pump or motors,.If the pump rated power is 4KW,Pump controller should choose 7.5KW.For Submersible pumps which used in the deep well,please check with us first .
2)Can I have the samples of your pump controller ?
Yes, we can send you the pump controller samples for your testing .
Pump controllers commissioned by our team work for both water supply and drainage under water level and pressure control.For water supply,the pump starts at low water level and stops at high water level.For drainage,the pump starts at high water level and stops at low high water level.
Typical application scenarios:
-Agricultural irrigation/ pumping
-Pressure Booster Systems
-Waste water treatment
-Water Tanks/Wells
-Drainage System
-Cooling Towers
-Flood Control
-Fishing Boat
Specifications of water pump controller
| Type | 20Y | |
| Model | 20Y-2.2KW | 20Y-3KW |
| Rated Power | 0.37-2.2KW | 0.37-3KW |
| Rated Input Voltage | 220V or 110V, 50Hz or 60Hz | |
| Qty.of Controlled Pump | Single pump | |
| Display | LCD display | |
| Signal Transmission Mode | Float switch Level Probe Pressureswitch Electric contact pressure gauge | |
| Water Level Indication | High/Middle/Low | |
| Max.Control Distance | ≤2000m without strong electric and electromagnetic fields | |
| Over/under-voltage Range | 176V-264V(adjustable) | |
| Protections | Pump stalled protection Dry run protection Over-load protection Under-voltage protection Over-voltage protection Open phase protection Short circuit protection | |
| Main Functions | Time setting Fault detection Anti-rust inspection Automatic restart after power recovery | |
| Working temperature Working humidity Degree of protection Install position | -25ºC-- +55ºC 20%--90%RH, no drips concreted IP22 Wall mounting | |
| Product Size | 210*139*65mm | |
| Package | Box size:21.9*7.4*14.7cm Carton size:45.5*31.5*32cm PCS/CTN:16 | |
1)How to choose the power of your pump controller?
Normally we need choose bigger power to run the water pump or motors,.If the pump rated power is 4KW,Pump controller should choose 7.5KW.For Submersible pumps which used in the deep well,please check with us first .
2)Can I have the samples of your pump controller ?
Yes, we can send you the pump controller samples for your testing .
