This browser does not support the video element.
Product Description of Irrigation Water Pump Control Panel
The most complete electrical panel for pumping and drainage systems ever.
20Y series single phase pump control panel is our best-selling electrical panel, because it is suitable for multiple applications for both clean water systems (emptying, filling, pressurization) and dirty water (emptying and draining waste water).
Typical application of Irrigation Water Pump Control Panel
-Agricultural irrigation/ pumping
-Pressure Booster Systems
-Waste water treatment
-Water Tanks/Wells
-Drainage System
-Cooling Towers
-Flood Control
-Fishing Boat
Specifications of Irrigation Water Pump Control Panel
General Specification | ||
Type | 20Y | |
Model | 20Y-2.2KW | 20Y-3KW |
Rated Power | 0.37-2.2KW | 0.37-3KW |
Rated Input Voltage | 220V/110V@50Hz or 60Hz | |
Qty.of Controlled Pump | Single pump | |
Display | LCD display | |
Signal Transmission Mode | Level float switch Float Switch Level probe Pressure switch Electric contact pressure gauge | |
Water Level Indication | High/Middle/Low | |
Max.Control Distance | ≤2000m without strong electric and electromagnetic fields | |
Over/under-voltage Range | 176V-264V(adjustable) | |
Protections | Pump stalled protection Dry run protection Over-load protection Under-voltage protection Over-voltage protection Open phase protection Short circuit protection | |
Main Functions | Time setting Fault detection Anti-rust inspection Automatic restart after power recovery | |
Working temperature Working humidity Degree of protection Install position | -25ºC-- +55ºC 20%--90%RH, no drips concreted IP22 Wall mounting | |
Product Size | 210*139*65mm | |
Package | Box size:21.9*7.4*14.7cm Carton size:45.5*31.5*32cm PCS/CTN:16 |
How to choose the power of your pump controller?
Normally we need choose bigger power to run the water pump or motors,.If the pump rated power is 4KW,Pump controller should choose 7.5KW.For Submersible pumps which used in the deep well,please check with us first .