Description, features, and benefits of the Single Phase Pump Controller

The Single Phase Pump Controller is suitable for remote monitoring and management of water intake pumping stations, water plant booster pumping stations, midway booster pumping stations, and district booster pumping stations in urban water supply systems. The pump station manager can remotely monitor the working status and operating parameters of the equipment on-site from the monitoring center; remotely control the start and stop of the water supply equipment; and monitor the panoramic view of the station or important work stations with images. Next, let's take a look at the product description, features, and advantages of the Single Phase Pump Controller. Here are some answers.

Here is the content list:

Product description of the Single Phase Pump Controller.

The main features and advantages of the Single Phase Pump Controller are.

Product description of the Single Phase Pump Controller.

The Single Phase Pump Controller is designed to start and stop pumps based on the detected water status, water consumption, and pressure changes in the pipeline. It can be a conventional system consisting of a pressure tank, pressure switch, water shortage protection device, check valve, four-way, etc. The complete isolation of the electrical part from the pipeline and the high ceiling of the control box gives the controller a safety that is unmatched by traditional systems. With the rapid development of technology and the sensor industry, the Single Phase Pump Controller with a pressure sensor, the electronic pressure controller, was born and quickly gained market acceptance for its unique advantages. The addition of a sensor probe to the controller senses the pressure and the use of microcontroller technology in the control circuit enables several intelligent control functions.

The main features and advantages of the Single Phase Pump Controller are.

Firstly, the Single Phase Pump Controller has two pressure control points, upper and lower, which can be freely set and adjusted to meet different control requirements. Secondly, the 4-digit LED display shows the pressure value in real-time, making it easy for the user to observe. Thirdly, the built-in relay signal output and anti-return differential setting to avoid frequent action of the controlled equipment. Fourth, the service life is longer than the traditional mechanical switch, and it will not fail to be invalid for long-term use. Fifth, the control accuracy is higher than the traditional mechanical switch, with no noise. Sixth, the Single Phase Pump Controller is vibration-resistant, anti-jamming, fast response and has stable performance. Seventh, in addition, it has several intelligent control functions such as time delay, water shortage protection, and over-pressure protection.

The above features make a Single Phase Pump Controller significantly more intelligent, and easy to install, as long as the controller is directly connected to the pipeline, without external relays, to achieve low-pressure pumping, enough pressure to stop pumping, to save energy, and extend the life of the pump, and to achieve unattended operation of the pump, can completely replace the pressure tank, pressure switch, water shortage protection device, check valve. The Single Phase Pump Controller is suitable for the automation of water supply and drainage systems in homes and flats, as well as for irrigation of flower gardens and trellises, automatically maintaining the pressure in the pipes. The Single Phase Pump Controller provides better control and effective pump protection, extending the life of the pump.

We are committed to bringing more and better products to our customers, and that is what we are doing. If you are interested in the Single Phase Pump Controller, you can contact us at https://www.winningcontroller.com/. We welcome you and look forward to working with you.