This browser does not support the video element.
Product Description of Irrigation Water Pump Control Panel
20Y series LCD display pump controller is a 1-phase control panel for manual and automatic operation of one pump,while 20YK stands for 20Y+ON/OFF remote server,20YK pump controller with remote server can only work with float switch if needed.The controller can provide mulitple protections against various pumps, such as centrifugal pumps,surface pumps,surface pumps,multistage pumps,deep well pumps,wasterwater pumps,pressure booster pumps,pipeline pumps,and etc.
Typical application of Irrigation Water Pump Control Panel
-Agricultural irrigation/ pumping
-Pressure Booster Systems
-Waste water treatment
-Water Tanks/Wells
-Drainage System
-Cooling Towers
-Flood Control
-Fishing Boat
Specifications of Irrigation Water Pump Control Panel
| General Specification | ||
| Type | 20Y | |
| Model | 20Y-2.2KW | 20Y-3KW |
| Rated Power | 0.37-2.2KW | 0.37-3KW |
| Rated Input Voltage | 220V/110V@50Hz or 60Hz | |
| Qty.of Controlled Pump | Single pump | |
| Display | LCD display | |
| Signal Transmission Mode | Level float switch Float Switch Level probe Pressure switch Electric contact pressure gauge | |
| Water Level Indication | High/Middle/Low | |
| Max.Control Distance | ≤2000m without strong electric and electromagnetic fields | |
| Over/under-voltage Range | 176V-264V(adjustable) | |
| Protections | Pump stalled protection Dry run protection Over-load protection Under-voltage protection Over-voltage protection Open phase protection Short circuit protection | |
| Main Functions | Time setting Fault detection Anti-rust inspection Automatic restart after power recovery | |
| Working temperature Working humidity Degree of protection Install position | -25ºC-- +55ºC 20%--90%RH, no drips concreted IP22 Wall mounting | |
| Product Size | 210*139*65mm | |
| Package | Box size:21.9*7.4*14.7cm Carton size:45.5*31.5*32cm PCS/CTN:16 | |
How does it work for water tank?
For water supply,when the water level is low , pump start to work . When the water level is high , Pump stop working automatically.For drainage,pump starts at high water level,stops at low water level.