This browser does not support the video element.
智能水泵控制器 – A 系列是具有所有应用的新一代智能水泵板，在一个单元中使用典型的计量传感器，便于操作。
它是一种实用、简单、紧凑和高度自动化的解决方案，用于管理压差系统、污水系统、雨水、残余喷射器以及一台和两台泵的水的升高、转移或冲量，取代了传统的面板 它们由不锈钢盒中的基本保护制造。
典型应用场景：
-农业灌溉/抽水
-增压器系统 （Pressure Booster systems）
-废水处理
-水箱/井 （Water Tanks/Wells）
-排水系统 （Drainage System）
-冷却塔 （Cooling Towers）
-防洪
-渔船
智能泵控制面板规格
| 类型 | 答1 | ||||||
| 型 | A1-4KW | A1-7.5KW | A1-11KW型 | A1-15KW | A1-18.5KW | A1-22KW | A1-30KW |
| 额定功率 | 0.75-4KW | 1.1-7.5KW | 1.1-11KW | 2.2-15KW | 3-18.5KW | 4-22KW | 5.5-30KW |
| 额定输入电压 | 380V±10%/50Hz 或 60Hz | ||||||
| 数量 可控泵 | 单泵 | ||||||
| 显示 | 液晶显示器 | ||||||
| 信号传输方式 | 浮球开关 探头 压力开关 电触点压力表 | ||||||
| 水位指示 | 高/中/低 | ||||||
| 最大控制距离 | ≤2000m，无强电场和电磁场 | ||||||
| Over/under-voltage Range | 304-456V(adjustable) | ||||||
| Protections | Pump stalled protection Dry run protection Over-load protection Under-voltage protection Over-voltage protection Open phase protection Short circuit protection | ||||||
| Main Functions | Time setting Fault detection Anti-rust inspection Automatic restart after power recovery | ||||||
| Working temperature Working humidity Install position | -25ºC-- +55ºC 20%--90%RH, no drips concreted Wall mounting | ||||||
| Product Size | 400x300x190mm | ||||||
| Package | Box size:41.5x34x23cm Carton size:71x49.5x43cm PCS/CTN:4 | ||||||
1),How to convert HP into KW ?
The conversion formula as :1HP=0.74KW
for example: 3HP=3*0.74KW=2.2KW.
2)How to choose the power of your pump controller?
Normally we need choose bigger power to run the water pump or motors,.If the pump rated power is 4KW,Pump controller should choose 7.5KW.For Submersible pumps which used in the deep well,please check with us first .
3)Can I have the samples of your pump controller ?
Yes, we can send you the pump controller samples for your testing .