Product Description
The split water pump control panel is designed to be encased to constitute the whole controller set.The intelligent control unit is an easy-to-use programmable control unit used for the control and protection of single booster pumps, deep well pumps and sewage pumps with direct start in the range of 0.75-30KW (1HP-40HP).
Typical application scenarios:
-Agricultural irrigation/ pumping
-Pressure Booster Systems
-Waste water treatment
-Water Tanks/Wells
-Drainage System
-Cooling Towers
-Flood Control
-Fishing Boat
Specifications of water pump controller
| Type | D1F-220V | |||||
| Model | D1F-11000-220V | D1F-30000-220V | ||||
| Rated Power | 0.75-11KW | 11-30KW | ||||
| Rated Input Voltage | 220V+10%/50Hz or 60Hz | |||||
| Qty.of Controlled Pump | Single pump | |||||
| Display | LCD display | |||||
| Signal Transmission Mode | Level float switch Level probe Pressure switchElectric contact pressure gauge |
|||||
| Water Level Indication | High/Middle/Low | |||||
| Max.Control Distance | ≤2000m without strong electric and electromagnetic fields | |||||
| Over/under-voltage Range | 176V-264V(adjustable) | |||||
| Protections | Pump stalled protection Dry run protection Over-load protection Under-voltage protection Over-voltage protection Open phase protection Short circuit protection |
|||||
| Main Functions | Time setting Fault detection Anti-rust inspection Automatic restart after power recovery |
|||||
| Product Size | 170x120x50mm | |||||
| Working temperature Working humidity Degree of protection Install position |
-25ºC-- +55ºC 20%--90%RH, no drips concreted IP22 Wall mounting |
|||||
Parameter Setting and Instruction
P01--Over-load protection current setting
P02--No-load protection current setting
P03--Time setting ON
P04--Time Setting OFF
P05--Restart time setting after no-load protection
P07--Over-voltage protection setting
P08--Under-voltage protection setting
P09--LCD backlight OFF time setting
1),What is the approximate life time for your control panel?
The designed life time of control panel is 8 years.
2),What is your after sales service policy?
According to the ordering quantity ,we will give some free spare parts or controller for maintenance or replacement and we will give technical training.takes 3-5 days for sample orders,and 15-20 days for orders.
3),How can I trust you ?
We have being devoting the pump control panel manufacturing and selling since 2016,now our company has been audited and approved ISO9001 and CE certification.Many pump supplier are using our controller to control and protect their pumps and motors.We can show you our workshop and welcome your visit to our factory.
4),What's your main market?
Asia/Europe/Middle East/North and south America/Africa etc.
5),How is the payment?
T/T L/C