This browser does not support the video element.
Product Description
Y series is ABS plastic LCD display water pump controller,which can work for both 1-phase and 3-phase up to two pumps.Beside automatic or manual ON/OFF switch,protecting the pump and the pump motor are priorities because a pump failure can have serious consequences.
Y2-220V is a single phase LCD display duplex water pump control box, specifically designed for residential and commercial 240vac pumps. Using high quality import microprocessors, this controller uses our float switch or probes to gain water level signal,as well as electric contact pressure gauge or pressure switch to gain pressure signal.
Typical application scenarios:
-Agricultural irrigation/ pumping
-Pressure Booster Systems
-Waste water treatment
-Water Tanks/Wells
-Drainage System
-Cooling Towers
-Flood Control
-Fishing Boat
Specifications of water pump controller
General Specification | ||||
Type | Y2-220V | |||
Model | Y2-4KW-220V | Y2-7.5KW-220V | Y2-11KW-220V | Y2-15KW-220V |
Rated Power | 0.75-4KW | 1.1-7.5KW | 1.1-11KW | 2.2-15KW |
Rated Input Voltage | 220+10%/50Hz or 60Hz | |||
Qty.of Controlled Pumps | Dual pumps | |||
Display | LCD display | |||
Signal Transmission Mode | Level float switch Level probe Pressure switch Electric contact pressure gauge | |||
Water Level Indication | High/Middle/Low | |||
Max.Control Distance | ≤2000m without strong electric and electromagnetic fields | |||
Over/under-voltage Range | 176V-264V(adjustable) | |||
Protections | Pump stalled protection Dry run protection Over-load protection Under-voltage protection Over-voltage protection Open phase protection Short circuit protection | |||
Main Functions | Time setting Fault detection Anti-rust inspection Dual pump rotation Automatic restart after power recovery | |||
Working temperature Working humidity Degree of protection Install position | -25ºC-- +55ºC 20%--90%RH, no drips concreted IP22 Wall mounting | |||
Product Size | 320x220x125mm | |||
Package | Box size:26.2*17.2*38cm Carton size:54*39.5*55.5cm PCS/CTN:6 |
1)How to choose the power of your pump controller?
Normally we need choose bigger power to run the water pump or motors,.If the pump rated power is 4KW,Pump controller should choose 7.5KW.For Submersible pumps which used in the deep well,please check with us first .
2)Can I have the samples of your pump controller ?
Yes, we can send you the pump controller samples for your testing .
3)Can you provide OEM or ODM ?
Yes,we can make the orders according to your detailed request.