Product Description of Irrigation Water Pump Control Panel
The single phase pump control panel is suitable for surface and submersible pumps up to 3kw. It has a dry run protection setting, ensuring full protection of pump system.The control box is an electric control panel which features automatically learned and manually resettable overload cut-out,and terminal board for the electrical connections and possible connection of pressure/float switch.
Typical application of Irrigation Water Pump Control Panel
-Agricultural irrigation/ pumping
-Pressure Booster Systems
-Waste water treatment
-Water Tanks/Wells
-Drainage System
-Cooling Towers
-Flood Control
-Fishing Boat
Specifications of Irrigation Water Pump Control Panel
| General Specification | ||
| Type | 20Y | |
| Model | 20Y-2.2KW | 20Y-3KW |
| Rated Power | 0.37-2.2KW | 0.37-3KW |
| Rated Input Voltage | 220V/110V@50Hz or 60Hz | |
| Qty.of Controlled Pump | Single pump | |
| Display | LCD display | |
| Signal Transmission Mode | Level float switch Level probe Pressure switch Electric contact pressure gauge | |
| Water Level Indication | High/Middle/Low | |
| Max.Control Distance | ≤2000m without strong electric and electromagnetic fields | |
| Over/under-voltage Range | 176V-264V(adjustable) | |
| Protections | Pump stalled protection Dry run protection Over-load protection Under-voltage protection Over-voltage protection Open phase protection Short circuit protection | |
| Main Functions | Time setting Fault detection Anti-rust inspection Automatic restart after power recovery | |
| Working temperature Working humidity Degree of protection Install position | -25ºC-- +55ºC 20%--90%RH, no drips concreted IP22 Wall mounting | |
| Product Size | 210*139*65mm | |
| Package | Box size:21.9*7.4*14.7cm Carton size:45.5*31.5*32cm PCS/CTN:16 | |
1)How does it work for water tank ?
When the water level is low , pump start to work . When the water level is high , Pump stop work automatically .
2)How to choose the power of your pump controller?
Normally we need choose bigger power to run the water pump or motors,.If the pump rated power is 4KW,Pump controller should choose 7.5KW.For Submersible pumps which used in the deep well,please check with us first .
3)Can I have the samples of your pump controller ?
Yes, we can send you the pump controller samples for your testing .
4)Can you provide OEM or ODM ?
Yes,we can make the orders according to your detailed request.
5)what is your delivery time?
It takes 3-5 days for sample orders,and 15-20 days for orders
=
Product Description of Irrigation Water Pump Control Panel
The single phase pump control panel is suitable for surface and submersible pumps up to 3kw. It has a dry run protection setting, ensuring full protection of pump system.The control box is an electric control panel which features automatically learned and manually resettable overload cut-out,and terminal board for the electrical connections and possible connection of pressure/float switch.
Typical application of Irrigation Water Pump Control Panel
-Agricultural irrigation/ pumping
-Pressure Booster Systems
-Waste water treatment
-Water Tanks/Wells
-Drainage System
-Cooling Towers
-Flood Control
-Fishing Boat
Specifications of Irrigation Water Pump Control Panel
| General Specification | ||
| Type | 20Y | |
| Model | 20Y-2.2KW | 20Y-3KW |
| Rated Power | 0.37-2.2KW | 0.37-3KW |
| Rated Input Voltage | 220V/110V@50Hz or 60Hz | |
| Qty.of Controlled Pump | Single pump | |
| Display | LCD display | |
| Signal Transmission Mode | Level float switch Level probe Pressure switch Electric contact pressure gauge | |
| Water Level Indication | High/Middle/Low | |
| Max.Control Distance | ≤2000m without strong electric and electromagnetic fields | |
| Over/under-voltage Range | 176V-264V(adjustable) | |
| Protections | Pump stalled protection Dry run protection Over-load protection Under-voltage protection Over-voltage protection Open phase protection Short circuit protection | |
| Main Functions | Time setting Fault detection Anti-rust inspection Automatic restart after power recovery | |
| Working temperature Working humidity Degree of protection Install position | -25ºC-- +55ºC 20%--90%RH, no drips concreted IP22 Wall mounting | |
| Product Size | 210*139*65mm | |
| Package | Box size:21.9*7.4*14.7cm Carton size:45.5*31.5*32cm PCS/CTN:16 | |
1)How does it work for water tank ?
When the water level is low , pump start to work . When the water level is high , Pump stop work automatically .
2)How to choose the power of your pump controller?
Normally we need choose bigger power to run the water pump or motors,.If the pump rated power is 4KW,Pump controller should choose 7.5KW.For Submersible pumps which used in the deep well,please check with us first .
3)Can I have the samples of your pump controller ?
Yes, we can send you the pump controller samples for your testing .
4)Can you provide OEM or ODM ?
Yes,we can make the orders according to your detailed request.
5)what is your delivery time?
It takes 3-5 days for sample orders,and 15-20 days for orders
=
