This small size 1-phase pump controller is an intelligent motor protector with easy-to-program protection equipment for direct starting of surface or submersible single-phase centrifugal pumps. As well as any other types of electric water pumps and general industrial electric motors with an output power of 0.37KW – 3KW (1 HP-4HP). The pump controller is useful in all cases where we need to control the load of a pump as well as its on and off function.
Typical application scenarios:
-Agricultural irrigation/ pumping
-Pressure Booster Systems
-Waste water treatment
-Water Tanks/Wells
-Drainage System
-Cooling Towers
-Flood Control
-Fishing Boat
Specifications of water pump controller
| Type | 20Y | |
| Model | 20Y-2.2KW | 20Y-3KW |
| Rated Power | 0.37-2.2KW | 0.37-3KW |
| Rated Input Voltage | 220V or 110V, 50Hz or 60Hz | |
| Qty.of Controlled Pump | Single pump | |
| Display | LCD display | |
| Signal Transmission Mode | Float switch Level Probe Pressureswitch Electric contact pressure gauge | |
| Water Level Indication | High/Middle/Low | |
| Max.Control Distance | ≤2000m without strong electric and electromagnetic fields | |
| Over/under-voltage Range | 176V-264V(adjustable) | |
| Protections | Pump stalled protection Dry run protection Over-load protection Under-voltage protection Over-voltage protection Open phase protection Short circuit protection | |
| Main Functions | Time setting Fault detection Anti-rust inspection Automatic restart after power recovery | |
| Working temperature Working humidity Degree of protection Install position | -25ºC-- +55ºC 20%--90%RH, no drips concreted IP22 Wall mounting | |
| Product Size | 210*139*65mm | |
| Package | Box size:21.9*7.4*14.7cm Carton size:45.5*31.5*32cm PCS/CTN:16 | |
1),What is your after sales service policy?
According to the ordering quantity ,we will give some free spare parts or controller for maintenance or replacement and we will give technical training.takes 3-5 days for sample orders,and 15-20 days for orders.
2),How can I trust you ?
We have being devoting the pump control panel manufacturing and selling since 2016,now our company has been audited and approved ISO9001 and CE certification.Many pump supplier are using our controller to control and protect their pumps and motors.We can show you our workshop and welcome your visit to our factory.
This small size 1-phase pump controller is an intelligent motor protector with easy-to-program protection equipment for direct starting of surface or submersible single-phase centrifugal pumps. As well as any other types of electric water pumps and general industrial electric motors with an output power of 0.37KW – 3KW (1 HP-4HP). The pump controller is useful in all cases where we need to control the load of a pump as well as its on and off function.
Typical application scenarios:
-Agricultural irrigation/ pumping
-Pressure Booster Systems
-Waste water treatment
-Water Tanks/Wells
-Drainage System
-Cooling Towers
-Flood Control
-Fishing Boat
Specifications of water pump controller
| Type | 20Y | |
| Model | 20Y-2.2KW | 20Y-3KW |
| Rated Power | 0.37-2.2KW | 0.37-3KW |
| Rated Input Voltage | 220V or 110V, 50Hz or 60Hz | |
| Qty.of Controlled Pump | Single pump | |
| Display | LCD display | |
| Signal Transmission Mode | Float switch Level Probe Pressureswitch Electric contact pressure gauge | |
| Water Level Indication | High/Middle/Low | |
| Max.Control Distance | ≤2000m without strong electric and electromagnetic fields | |
| Over/under-voltage Range | 176V-264V(adjustable) | |
| Protections | Pump stalled protection Dry run protection Over-load protection Under-voltage protection Over-voltage protection Open phase protection Short circuit protection | |
| Main Functions | Time setting Fault detection Anti-rust inspection Automatic restart after power recovery | |
| Working temperature Working humidity Degree of protection Install position | -25ºC-- +55ºC 20%--90%RH, no drips concreted IP22 Wall mounting | |
| Product Size | 210*139*65mm | |
| Package | Box size:21.9*7.4*14.7cm Carton size:45.5*31.5*32cm PCS/CTN:16 | |
1),What is your after sales service policy?
According to the ordering quantity ,we will give some free spare parts or controller for maintenance or replacement and we will give technical training.takes 3-5 days for sample orders,and 15-20 days for orders.
2),How can I trust you ?
We have being devoting the pump control panel manufacturing and selling since 2016,now our company has been audited and approved ISO9001 and CE certification.Many pump supplier are using our controller to control and protect their pumps and motors.We can show you our workshop and welcome your visit to our factory.
